Mylock 234d Manual

234d Manual Mylock 234 manual

Janome 234 Instruction manual

Janome 234d 234 Overlocker PDF Instruction Manual:

JANOME MyLock 234D Users Guide JANOME 2041 / 2049 Users Guide JANOME Finesse 234D Users Guide JANOME MyLock 204D Users Guide JANOME MyLock 204D Users Guide JANOME 150 (655R) Users Guide JANOME Sewist 500 Users Guide JANOME MyLock 204D Users Guide JANOME MyLock 203 Users Guide JANOME My Style 24 Users Guide JANOME Jem Gold 2 Users Guide JANOME. Janome 134D MyLock Serger Sewing Machine Instruction Manual. Includes: Threading machine. Changing needles. You can also find Sewing machine or Serger user manuals and service manuals. Janome 234d 234 Overlocker PDF Instruction Manual. Janome Mylock 134d Overlocker. Janome 234d 234 Overlocker PDF Instruction Manual: Why your cotton might brake? Make sure your tension is not to tight and that there is now fluff or cotton stuck in between your tension plates. I sometimes use a string of the stitch to pull in between the tension plates.

Why your cotton might brake?

Make sure your tension is not to tight and that there is now fluff or cotton stuck in between your tension plates. I sometimes use a string of the stitch to pull in between the tension plates. I always set the needles tension first and then i balance the tension of the upper and lower looper.

Make sure the cotton are not looped around a guide. Black cotton and some cottons can build up their own tension. Try different cotton. I've had many a headache with this problem.

Janome Mylock 234d Instruction Manual

Check that the needles are not blunt or bent. I always use schmetz needles. If your needle plate has any damage where the cotton can get hooked. Use a small file or sand paper to remove it. The stitch tongue must be very smooth and the stitch must slide of smoothly. Check that your lower looper point does not have a sharp hook on it. You can use a very fine water sand paper to remove it.

If your needles are touching the looper, i could indicate that your lower looper is out of position. *.*(Always check this with new needles)